|
Type: 23,000 liter Top Discharge Multi-Layer Flexi Tank
Material: Patented Polyethylene Films
- Resistant to abrasion and stress cracking
- Highly flexible with exceptional elastic characteristics
- Unique sealing technique
- Reliable and user friendly
Protective outer cover (Woven Polypropylene Fabric)
| Description |
Typical Characteristics |
| Denier: |
1500 |
| Weight: |
205 gsm |
| Low temperature flexibility: |
-20 degrees Celsius |
| High temperature flexibility: |
+70 degrees Celsius |
| Lamination one side: |
35 gsm |
| Tensile strength warp D/N13934-1: |
2000n / 5Cm |
| Tensile strength weft D/N13934-1: |
1565n / 5Cm |
| Elongation warp ISO 13934-1: |
18% |
| Elongation weft ISO 13934-1 |
21% |
| UV Stability EN 1895: |
150 KLY |
Recommended use
Single use flexitank for non-hazardous foodstuffs, pharmaceuticals, chemicals or industrial products
Food-grade flexitank
| Description |
Typical Characteristics |
| Total weight of fabric per unit: |
45.72 kgs/1330gsm |
| Weight: |
220 gsm |
| Tear strength warp: |
80N |
| Tear strength weft: |
25N |
| Low Temperature Flexibility: |
-20 Celsius |
| High Temperature Flexibility: |
+60 Celsius |
| Tensile strength MD: |
31.7n/mm2 |
| Tensile strength TD: |
33.5n/mm2 |
| Elongation MD (ASTM D882): |
855% |
| Elongation TD (ASTM D882): |
920% |
| Dart Impact (ASTM 1709): |
1250 g |
| Melt point index: |
0.8 |
Physical properties of flexitank
| Description |
Typical Characteristics |
| Capacity of flexitank: |
23,000 liters / 6,220 US gallons |
| Maximum payload weight: |
21,000 kgs / 46,300 lbs |
| Size of flexitank: |
Plus/Minus 2% |
| Material of construction of flexitank: |
7300mm x 3900mm |
| Exterior cover: |
Polypropylene |
| Valve position: |
Top Rear Mounted |
| Valve size: |
2 inch |
| Valve type: |
Ball |
| Hose size: |
2 inch bore X 4ft long |
| Hose connection: |
Two inch male cam-lock |
| UK |
SI number 1523. The Materials and Articles in Contact with Food Regulation 1987
SI number 1376. The Plastic Materials and Articles in contact with Food Regulation 1998
SI number 3162. The Plastic Materials and Articles n contact with Food (Amendment) (England) Regulations 2000
BPF/BIBRA Code of Practice, 1986. Updates: 1988, 1991, 1995.
|
| USA |
FDA Regulations 21 CFR 177.1350 (1998 edition) Ethylene-vinyl acetate copolymers.
FDA Regulations 21 CFR 177. 1520 (1998 edition) Polyolefin's
|
| EU |
Produced from monomers listed in section A Annex 11 of EU Directive 90/128/EEC relation to plastics materials and articles likely to come into contact with foodstuffs published 23/2/90 corrigenda 13/12/90 and its amendments 92/39/EEC (14/5/92), 93/9/EEC (15/3/93), 95/3/EC (14/2/95), 96/11/EC (5/3/96), and 99/91/EC (23/11/99). |
|
